induro acid-catalyst flooring lacquer (2 part) - Stillorgan Decor

morrells

induro acid-catalyst flooring lacquer (2 part)

from €67.95

choose size : 5lt
choose your finish :

reset
× Points Icon

experience points

We love creativity so much that we want to reward it because with every home project you undertake, the more your creativity and experience will grow. So, now you can save your experience in our inspiration vault, allowing you to use it to advance your future projects.

register

Create an account with us and
earn 150 experience points

purchase

For every piece purchased for your projects,
you will deposit further points in your vault; 1€ = 1 point

enjoy

Use the contents of your vault to offset future home decor projects,
e.g. 300 pts = 10€ discount

continue shopping

quantity
−
+
add to wishlist
add to wishlist

description

A quick drying, low odour, high build acid-catalyst lacquer designed for application to wooden flooring by mohair roller, big-foot applicator or T-bar. induro® Acid-Catalyst Flooring Lacquer is available as a clear product in a range of sheens.

induro® Acid-Catalyst Flooring Lacquer will accept light traffic 24 hours after application. Do not place furniture or move furniture across the floor surface for at least 72 hours.

Formulated to provide excellent resistance to abrasion, wet and dry heat, spirit solutions and a wide range of household chemicals. Meets FIRA 6250 Horizontal Surfaces (excluding kitchen worktops) as Heavy/Severe Use.

Substrate Preparation

Virgin substrate

  1. Prepare with 120g and 240g sanding paper
  2. Completely remove all dust residue prior to application

Pre-coated substrate

  1. Strip back to the wood
  2. Sand with a series of grits between 36g and 120g using a belt sander
  3. Finish sanding with a tri- or monodisc finishing sander

Staining

Not suitable for use over solvent based stains

Application Guidelines

  1. Use a short mohair or similar roller, mohair flooring pad or T-bar applicator
  2. Predominantly with the grain, apply the lacquer evenly, making smooth passes with the roller/pad
  3. Apply 3-5 coats at 75-80g/m2 per coat wet film thickness (minimum of 4 coats for high traffic areas)
  4. Allow 3 hours to dry between coats
  5. For best results, only apply 2 coats per day

Maintenance Tips

  1. Avoid cleaning and vacuuming for the first 21-28 days
  2. use entrance mats and furniture leg pads to avoid damage to the finish
  3. wipe up and remove liquid spills immediately
  4. frequently sweep/vacuum using a hard-floor attachment
  5. when required, use a mop or cloth lightly dampened with a weak detergent solution for general aftercare
  6. trim pet claws and nails to reduce scratches and indentations

 

  • Pack sizes: 5L
  • Catalysis: 9 parts lacquer : 1 part catalyst by volume
  • Pot life: 36 hours
  • Touch dry: 25 – 30 minutes
  • Sandable: 2 – 3 hours @ 18°C
  • Recoatable: 3 hours @ 18°C
  • Coverage: 40m² per 5 litres dependent on the method of application, porosity of the timber and type/desired finish
  • Typical finish: 3 – 5 coats at 75 – 80g/m² per coat, coat on coat

similar products