1. Using a clean microfiber or similar cleaning cloth scrub your tiles with the provided Krud Kutter Cleaner and Degreaser. Ensure to clean the tiles thoroughly and concentrate between the grout as grease or grime can build here especially. After cleaning thoroughly with Krud Kutter, clean again with a damp cloth to remove any residue. Allow the tiles to dry completely before the next step.
2. Apply the Prodec Low Tack Tape to any edges and surfaces you do not want to paint and ensure that the edges of the tape are firmly pressed down to avoid any paint bleed.
3. Pour the Otex Akva Primer into the roller tray and using the Fleetwood Pro-D Paint Brush cut in around any edges or intricate areas first. Do not over brush the paint as this will cause brush marks. Using the Two Fussy Blokes Roller apply primer to the tiles. Apply to one section at a time ensuring not to over apply the paint. When completely coated apply the roller again in one direction, section by section to ensure an even smooth finish.
4. After your first coat is fully dry, apply a second coat using the same method as step 3. (You can wrap you brush and roller in an airtight plastic bag or film to prevent them drying out between coats.
5. Clean your roller and brush with warm soapy water followed by clean water.
6. When your primer is dry repeat the process above with your Luja tile topcoat applying 2 coats.
7. Remove any excess paint from your brush and roller on newspaper or cardboard and then clean with warm soapy water and then clean water.
8. Allow to dry and enjoy your freshly painted new tiles.