description
kitchen cupboard paint kit by fleetwood
Our Painting Made Easy ‘Kitchen Cupboard Kit’ makes it easy to transform your kitchen cupboards with a beautiful, hard wearing finish from the Fleetwood Advanced Woodwork Range.
This Painting Made Easy Set includes:
1 x 750ml Krud Kutter Gloss Off
4 x Sanding Pads in Fine and Medium
2 x Prep Tack Cloths
1 x 2″ Fleetwood Short Grip Synthetic Paint Brush
1 x 4″ Plastic Roller Tray
1 x 4″ Roller Frame
1 x 3pk Two Fussy Blokes 5mm Nap 4″ Smooth Rollers
1 x 1.5″ Prodec Advance Low Tack Precision Edge Masking Tape / Fleetwood Low Tack Washi Tape
1 x Prodec Advance Lightweight Protector Dust Sheet
1 x 500ml White Spirit
1 x 2.5lt Fleetwood Bloxx-It Oil Based Primer tinted in a suitable colour for your topcoat
1 x 2.5lt Fleetwood Advanced Eggshell/Satinwood/High Gloss in your colour choice
FREE 1 x Prodec Metal Can Opener
Please note we are unable to accept returns of paint which has been tinted to your colour selection. We advise purchasing a sample pot of your chosen colour prior to purchasing larger quantities. We do not recommend choosing colours from a colour screen as screens do not accurately represent paint colours as they will appear in your home.
You can read our full terms and conditions here.
KIT PROCESS
- Using a clean microfibre or similar cleaning cloth, thoroughly clean your cupboards using the provided Krud Kutter Gloss Off. Make sure to focus on nooks and crannies where grease and grime can build up. This will ensure your cupboards are degreased and will aid in dulling any existing finish. This is the most important part of any painting process.
- Lay your dust sheet and using a provided fine sanding pad lightly sand the entire cupboard focusing evenly on one area at a time.
- Using a tack cloth clean the cupboards to remove any dust and then with a clean damp cloth to remove any possible remaining residue.
- Remove any knobs or furniture that will aid in ensuring a clean finish and apply the provided masking tape to any edges or areas you want to avoid painting. This will ensure beautiful clean lines after the project is complete.
- Using the 2″ Short Grip brush cut in any edges or intricate areas with the Fleetwood Bloxx-It Primer. Then using the 5mm Two Fussy Blokes roller apply undercoat to the entire surface ensuring not to over apply as this may cause drips. After 2 – 4 hours apply a second coat of undercoat using the same methods as above. You can wrap your painting equipment in cling film or an air tight bag between coats to prevent cleaning between coats.
- Clean your painting equipment using the white spirits followed by warm soapy water followed by clean water.
- After 2- 4 hours you can apply your first coat of topcoat using the same methods as above.
- When the first coat of topcoat is completely dry use your fine sanding pad to lightly sand the surface, looking out for any drips or imperfections. This will aid in a beautiful even finish. Clean with a tack cloth followed by clean damp cloth.
- Apply your second coat of topcoat using the same methods as above.
- When the topcoat is fully dry remove any masking tape; then sit back, relax and enjoy your beautifully painted kitchen cupboards.
